Hayward Max-Flo VS Swimming Pool Pump
Max-Flo II: even higher performance.
The Hayward Max-Flo VS is specifically engineered for the demanding requirements of todays in-groundswimming pool/spa that is equipped with large capacity filters, heaters, and pool cleaning equipment.
The Max Flo XL is the ideal pump as a replacement or for a new installation.
Exceptional hydraulic performances.
Resists chemical and saline corrosion under normal use conditions.
Extra large strainer basket with transparent strainer cover.
Injection-moulded resin and strengthened components to ensure easy maintenance.
Energy savings of up to 85% on electrical consumption
Simple, intuitive digital interface
4 digital inputs allow for the pump to be controlled via an aquaRite + type home control box
180 deg rotary box allows convenient access to the user interface
New connection box for easier electrical connection
Quarter-turn opening lid cover for easy pump basket maintenance
Union fittings provided for easy installation
Recommended for pools up to 65m³.
|Pump Power Conversions|
|0.25 Kw||0.33 HP|
|0.375 Kw||0.5 HP|
|0.55 Kw||0.75 HP|
|0.75 Kw||1.0 HP|
|1.12 Kw||1.5 HP|
|1.5 Kw||2.0 HP|
|2.25 Kw||3.0 HP|
Please note that most domestic pumps are Single Phase 240v pumps. Three Phase 415V pumps are very uncommon in a domestic environment. If you are unsure, you must check with your qualified Electrician who can advise you on your requirements.
The Pump comes complete with 50MM Solvent Unions for both the horizontal intake & vertical discharge.
We recommend you use P.T.F.E tape or LA-CO Slic-Tite to apply to the male thread on your pump unions. please order your unions if required from the pipework section. The 1 1/2" male threaded unions are ideal if you are connecting your remaining pipework with normal solvent weld fittings.
We also recommend the use of the Anti-vibration pad, as this allows the pump to be installed onto various floor surfaces with the added sound & vibration deadening benefit the pads give.
This Product has a 2 year warranty on the pump wet end, 2 year warranty on the pump motor and 1 year warranty on the mechanical seal.
Please note that all pumps are factory wet tested, so a small amount of water may still be present in the pump.
Warranty will be void if damage is due to chemical or sand/grit damage to the seals of this pump. This pump cannot be run dry as this WILL damage the shaft seal.