Hayward Max Flo XL Swimming Pool Pump
Max-Flo XL: even higher performance.
The Max-Flo XL has all the great qualities of the Max-Flo I pump with improvements that optimise its performance.
New characteristics such as a large strainer basket, a better performing motor ensure simple and more economical use and the new camlock lid system.
The Max Flo XL is the ideal pump as a replacement or for a new installation.
Exceptional hydraulic performances.
Resists chemical and saline corrosion under normal use conditions.
Extra large strainer basket with transparent strainer cover.
Injection-moulded resin and strengthened components to ensure easy maintenance.
Delivery: up to 21.5 m³/h
Head: up to 16 m
Power supply: single phase 50 Hz
Power: from 0.53 kW up to 1.1 kW
Maximum operating pressure: 2 bar
Temperature of pumped liquid: from 0 °C to 40 °C
|Pump Power Conversions|
|0.25 Kw||0.33 HP|
|0.375 Kw||0.5 HP|
|0.55 Kw||0.75 HP|
|0.75 Kw||1.0 HP|
|1.12 Kw||1.5 HP|
|1.5 Kw||2.0 HP|
|2.25 Kw||3.0 HP|
Please note that most domestic pumps are Single Phase 240v pumps. Three Phase 415V pumps are very uncommon in a domestic environment. If you are unsure, you must check with your qualified Electrician who can advise you on your requirements.
The Pump comes complete with 50MM Solvent Unions for both the horizontal intake & vertical discharge.
We recommend you use P.T.F.E tape or LA-CO Slic-Tite to apply to the male thread on your pump unions. please order your unions if required from the pipework section. The 1 1/2" male threaded unions are ideal if you are connecting your remaining pipework with normal solvent weld fittings.
We also recommend the use of the Anti-vibration pad, as this allows the pump to be installed onto various floor surfaces with the added sound & vibration deadening benefit the pads give.
This Product has a 2 year warranty on the pump wet end, 2 year warranty on the pump motor and 1 year warranty on the mechanical seal.
Please note that all pumps are factory wet tested, so a small amount of water may still be present in the pump.
Warranty will be void if damage is due to chemical or sand/grit damage to the seals of this pump. This pump cannot be run dry as this WILL damage the shaft seal.